UPS2 25-40/60 130
High-efficiency circulator pump with permanent-magnet motor (ECM technology) fit for the ErP directive No 641/2009 due to continuously variable speed control for circulation of clean heating water according to VDI 2035.
Features and benefits: UPS2 25-40/60 130
High-efficiency circulator pump with permanent-magnet motor (ECM technology) complying with the ErP directive No 641/2009 thanks to continuously variable speed control. Suitable for circulation of clean heating water according to VDI 2035.
Features and benefits:
- Complying with requirements of the ErP directive as from 2015.
- 1 pump replaces 3 variants.
- It is available as pump head without pump housing. Fits on all 4-m, 5-m and 6-m pump housings of the Series 100.
- For tight installations, i.e. in boiler applications.
- High energy savings thanks to an energy efficiency index (EEI) lower than 0.23.
- Complies with the German regulation on energy saving in buildings and building systems – Energieeinsparverordnung – EnEV §14(3).
- One button for simple selection among three proportional-pressure curves or three fixed speeds.
- No corrosion issues thanks to the electrocoated pump housing.
- Reduced installation costs as no external motor protection is required.
|
|
| Liquid: |
| Pumped liquid: |
|
Water |
| Liquid temperature range: |
|
2 .. 95 °C |
| Selected liquid temperature: |
|
60 °C |
| Density: |
|
983.2 kg/m³ |
| |
| Technical: |
| Rated flow: |
|
2.06 m³/h |
| Rated head: |
|
3.08 m |
| TF class: |
|
95 |
| Approvals: |
|
CE,VDE,WEEE |
| |
| Materials: |
| Pump housing: |
|
Cast iron |
| |
|
EN-JL1020 |
| |
|
ASTM A48-25B |
| Impeller: |
|
Composite |
| |
|
PES 30% GF + PESU-GF20% |
| |
| Installation: |
| Range of ambient temperature: |
|
0 .. 40 °C |
| Maximum operating pressure: |
|
10 bar |
| Type of connection: |
|
G |
| Size of connection: |
|
1 1/2 inch |
| Pressure rating for connection: |
|
PN 10 |
| Port-to-port length: |
|
130 mm |
| |
| Electrical data: |
| Power input P1: |
|
48 W |
| Mains frequency: |
|
50 / 60 Hz |
| Rated voltage: |
|
1 x 230 V |
| Maximum current consumption: |
|
0.42 A |
| minimum current consumption: |
|
0.06 A |
| Enclosure class (IEC 34-5): |
|
IP44 |
| Insulation class (IEC 85): |
|
F |
| Built-in motor protection: |
|
NONE |
Product name
UPS2 15-40/60 130
Materials
UPS2 25-40/60 130
High-efficiency circulator pump with permanent-magnet motor (ECM technology) fit for the ErP directive No 641/2009 due to continuously variable speed control for circulation of clean heating water according to VDI 2035.
Features and benefits: UPS2 25-40/60 130
High-efficiency circulator pump with permanent-magnet motor (ECM technology) complying with the ErP directive No 641/2009 thanks to continuously variable speed control. Suitable for circulation of clean heating water according to VDI 2035.
Features and benefits:
- Complying with requirements of the ErP directive as from 2015.
- 1 pump replaces 3 variants.
- It is available as pump head without pump housing. Fits on all 4-m, 5-m and 6-m pump housings of the Series 100.
- For tight installations, i.e. in boiler applications.
- High energy savings thanks to an energy efficiency index (EEI) lower than 0.23.
- Complies with the German regulation on energy saving in buildings and building systems – Energieeinsparverordnung – EnEV §14(3).
- One button for simple selection among three proportional-pressure curves or three fixed speeds.
- No corrosion issues thanks to the electrocoated pump housing.
- Reduced installation costs as no external motor protection is required.
|
|
| Liquid: |
| Pumped liquid: |
|
Water |
| Liquid temperature range: |
|
2 .. 95 °C |
| Selected liquid temperature: |
|
60 °C |
| Density: |
|
983.2 kg/m³ |
| |
| Technical: |
| Rated flow: |
|
2.06 m³/h |
| Rated head: |
|
3.08 m |
| TF class: |
|
95 |
| Approvals: |
|
CE,VDE,WEEE |
| |
| Materials: |
| Pump housing: |
|
Cast iron |
| |
|
EN-JL1020 |
| |
|
ASTM A48-25B |
| Impeller: |
|
Composite |
| |
|
PES 30% GF + PESU-GF20% |
| |
| Installation: |
| Range of ambient temperature: |
|
0 .. 40 °C |
| Maximum operating pressure: |
|
10 bar |
| Type of connection: |
|
G |
| Size of connection: |
|
1 1/2 inch |
| Pressure rating for connection: |
|
PN 10 |
| Port-to-port length: |
|
130 mm |
| |
| Electrical data: |
| Power input P1: |
|
48 W |
| Mains frequency: |
|
50 / 60 Hz |
| Rated voltage: |
|
1 x 230 V |
| Maximum current consumption: |
|
0.42 A |
| minimum current consumption: |
|
0.06 A |
| Enclosure class (IEC 34-5): |
|
IP44 |
| Insulation class (IEC 85): |
|
F |
| Built-in motor protection: |
|
NONE |
Product name
UPS2 15-40/60 130
| |
